Explore our certified switch mode power supplies, dual-channel chargers, and DC UPS models optimized for seamless deployment across Ghana.
Ghana's rapid industrialization across Accra, Kumasi, Takoradi, and the mineral-rich Western Region has outpaced grid expansion, creating severe electrical stability challenges for modern automation, security, and communications systems.
Industrial operations in Ghana frequently cope with rolling blackouts, localized load shedding (known locally as Dumsor), severe voltage sags down to 140V AC, and lightning-induced voltage surges during the tropical rainy season. Standard commercial power supplies fail prematurely under these stress conditions. OEM/ODM custom battery backup modules engineered with wide 90V–290V AC tolerance ensure uninterrupted operational continuity for critical loads.
Operating equipment in West Africa requires rigorous thermal design. Ambient temperatures inside outdoor enclosures across Tema port facilities or remote telecom towers routinely cross 45°C. Our industrial DC UPS and battery chargers utilize premium 105°C-rated electrolytic capacitors, heavy-gauge aluminum heat sinks, and potted magnetics to ensure zero-derating performance under intense heat and high relative humidity.
When an unbuffered power supply trips in an automated cocoa processing plant or an underground gold mine's telemetry control unit, the financial loss is not merely the replacement cost of the power module—it is measured in hours of line downtime, corrupted PLC logic, and compromised site security. Installing custom-engineered DC UPS units with built-in battery management reduces unexpected outages by over 98.4% in field installations across West Africa.
Manufactured by Sanstar Microsystems Pvt. Ltd. (under the Micro Power brand), our power solutions bring 30+ years of dedicated power electronics R&D to system integrators, EPC contractors, and equipment OEMs in Ghana.
We design custom output profiles—ranging from standard 12V, 24V, and 48V DC outputs to specialized multi-rail systems (e.g., simultaneous 13.8V floating charge + 5V auxiliary supply) to fit exact equipment enclosure constraints.
Integrated micro-controlled charging routines support VRLA, AGM, Gel, and LiFePO4 chemistry. Features include automatic deep-discharge cut-off (LVD), reverse-polarity protection, temperature-compensated charging, and potential-free relay contacts for remote monitoring via SCADA or SNMP.
Every single power unit undergo a 100% full-load thermal burn-in cycle and high-voltage breakdown dielectric testing prior to packaging. This guarantees zero-defect arrival for shipments dispatched to Tema Port or Kotoka International Airport freight hubs.
Compare standard industrial SMPS against integrated DC UPS and battery charger units to determine the optimal specification for your deployment.
| Feature / Specification | Standard Commercial SMPS | Industrial DIN-Rail SMPS | Micro Power OEM/ODM DC UPS & Charger |
|---|---|---|---|
| AC Input Voltage Range | 180V – 240V AC | 90V – 264V AC | 90V – 290V AC (Extreme Grid Ready) |
| Mains Failure Seamless Backup | No (Requires External UPS) | No (Droop on mains cut) | Instant Zero-Transfer Switchover |
| Battery Charging Circuitry | None | External diode required | Integrated 3-Stage Smart Charger (Float/Boost) |
| Operating Temperature | 0°C to 40°C | -10°C to 60°C | -20°C to +70°C Full Load Ambient |
| Low Voltage Disconnect (LVD) | Not Available | Optional module | Built-in Microcontroller Cut-Off (Prevents Sulphation) |
| Fault Signalization Contacts | Basic LED | DC-OK Relay | Potential-Free Relay Output (AC Fail / Battery Low) |
| Certifications & Standards | Basic CE | CE / UL / BIS | BIS (IS 13252), CE, UL, ISO 9001:2015 Compliant |
From security systems in urban Accra to heavy machinery installations in the Western Region, our power supplies serve as the dependable electrical heartbeat of critical equipment.
High-definition IP surveillance networks across banking head offices in Ridge and commercial hubs in Airport Residential Area require constant 12V DC or 48V PoE power. Our 60W UL-certified SMPS cum battery chargers and slim DIN-rail modules maintain DVR/NVR rack operation through sudden blackout cycles without dropping video recording frames.
Gold mining installations demand industrial-grade 24V DC DIN-rail power supplies engineered for high vibration resistance, extreme dust ingress, and wide temperature swings. Micro Power SMPS modules power PLC control panels, solenoid valves, and safety instrumentation across harsh surface and underground processing sites.
Cellular towers operated by major telecom providers across Ashanti, Northern, and Volta regions rely on robust 48V DC power convertors and DC UPS systems. Paired with solar hybrid controllers, our OEM battery backup systems maintain communication link uptime during extended grid failures.
Power utility sub-stations (ECG/VRA sub-transmission networks) require uninterrupted DC tripping power for Vacuum Circuit Breakers (VCB). Micro Power’s specialized high-voltage battery chargers deliver reliable 110V/220V DC trickling and boost charge profiles to maintain breaker readiness.
Automated Mains Failure (AMF) panels for commercial buildings and industrial plants require constant 12V or 24V float chargers to guarantee instant generator start-up when grid power collapses. Our float/boost chargers prevent battery overcharging while keeping starting batteries at peak CCA capacity.
Hospitals and medical laboratories in Kumasi and Takoradi utilize our custom DC power packs to safeguard delicate diagnostic equipment, patient monitoring stations, and cold-chain vaccine refrigeration controllers against power disturbances.
As Ghana transitions toward smart grid initiatives, renewable energy integration, and expanded manufacturing under the 1D1F (One District One Factory) initiative, DC power requirements are evolving rapidly.
While traditional Sealed Lead-Acid (SLA) batteries remain widespread across Ghana due to upfront cost, industrial users are increasingly transitioning to Lithium Iron Phosphate (LiFePO4) chemistry. LiFePO4 offers 3x longer cycle life in high ambient temperatures. Our ODM manufacturing team provides custom charge-controller curves designed specifically for lithium battery integration in tropical climates.
For mission-critical processing lines in Tema and Takoradi, single point of power failure is unacceptable. Industrial engineers are adopting N+1 redundant power supply configurations using our Diode OR-ing Redundancy Modules. This allows continuous operational uptime even if one SMPS unit or power phase experiences a total fault.
Under the corporate leadership of Sanstar Microsystems Pvt. Ltd., Micro Power has built a three-decade reputation as an engineering-driven power supply manufacturer.
We maintain an all-women incoming quality control (IQC) team and a 100% anti-static ESD assembly shop floor. Every transformer, MOSFET, and IC is rigorously tested prior to board mounting to guarantee low field-failure rates.
Our DIN-rail and enclosed power supply ranges carry BIS certification (IS 13252), CE compliance for European export markets, UL recognized component status, and compliance with IEC/EN safety protocols.
We provide full export support for Ghanaian importers, distributors, and project contractors—including custom HS coding, sea freight containerization via Tema Port, air freight to Accra, and complete Certificate of Conformity documentation.
Get clear, authoritative answers regarding specs, customs compliance, customization, and warranty for orders shipping to West Africa.
Our industrial SMPS and battery charger units are engineered with a ultra-wide AC input range of 90V to 290V AC. Unlike standard power supplies that trip or burn out when voltage dips below 180V, our units continue regulating clean DC output even during severe grid sags across Accra or remote industrial sites.
Yes. We specialize in comprehensive OEM/ODM services. Our in-house engineering team can customize output voltage combinations, terminal block layouts, mounting formats (DIN rail, panel mount, open-frame), metal enclosure colors, branding labels, and custom user manuals matching your project branding.
Standard stock catalog models ship within 3–7 business days. Custom OEM/ODM orders take typically 2–3 weeks for production and 100% burn-in validation. Air freight to Kotoka International Airport (Accra) takes approximately 5–7 days, while ocean freight shipments to Tema Port take 25–35 days depending on shipping line routing.
During extended power outages in Ghana, connected loads can drain standby batteries completely, causing permanent cell sulphation or failure. Our DC UPS and battery power packs feature an automated microcontroller LVD cut-off that safely disconnects the load when battery voltage drops below the safe threshold (e.g., 10.5V on a 12V battery), extending battery lifespan significantly.
We supply complete documentation including Certificate of Origin, CE Compliance Declarations, BIS Certification test reports (IS 13252), UL certificates, ISO 9001:2015 quality management documentation, and detailed factory test reports for smooth inspection by the Ghana Standards Authority (GSA) and customs authorities.
Yes. By utilizing our specialized Diode OR-ing Redundancy Modules or specifying models with built-in current-sharing capability, multiple power units can be connected in parallel (N+1 configuration) to ensure uninterrupted power delivery even if one unit is damaged or disconnected.
Consult with our application engineers today. Send us your voltage, current, mechanical enclosure, and autonomy specs for a customized quotation within 24 business hours.
Inquire Now